Today different resins are used in order to crosslink the cellulose fibers in paper products and improve their strength characteristics, especially wet strength. Some neutral, low-molecular-weight molecules (formaldehyde, glyoxal) can impart wet strength if they are retained and dried up in pulp. However, these materials cannot be used at the wet end of a paper machine, since they lack a means of retention. Polyamide-epichlorohydrin (PAE) and glyoxylated acrylamide (GPAM) resins are applied in papers made under alkaline condition. Polyamide-epichlorohydrin (PAE) and glyoxylated acrylamide (GPAM) resins are applied extensively, which are retained by fiber and improve the dry and wet strengths of the papers. Compared to PAE, GPAM presents some advantages such as more efficiency in increasing the wet and dry strengths of paper, retention of fine and drainage of pulp. The curing of GPAM occurs at room temperature and therefore it is able to improve wet strengths of paper before drying. This reduces paper breakage during the open draw transfer of paper and improves paper machine efficiency. Overall, GPAM is a valuable resin which may be applied in papermaking successfully.
Yadollahi, R., Hamzeh, Y., Mahdavi, H., & Ghasemian, A. (2014). Crosslinking of Cellulose for Improvement of Wet Strength in Papers. Basparesh, 3(4), 49-57. doi: 10.22063/basparesh.2014.1030
MLA
Rahim Yadollahi; Yahya Hamzeh; Hossein Mahdavi; Ali Ghasemian. "Crosslinking of Cellulose for Improvement of Wet Strength in Papers". Basparesh, 3, 4, 2014, 49-57. doi: 10.22063/basparesh.2014.1030
HARVARD
Yadollahi, R., Hamzeh, Y., Mahdavi, H., Ghasemian, A. (2014). 'Crosslinking of Cellulose for Improvement of Wet Strength in Papers', Basparesh, 3(4), pp. 49-57. doi: 10.22063/basparesh.2014.1030
VANCOUVER
Yadollahi, R., Hamzeh, Y., Mahdavi, H., Ghasemian, A. Crosslinking of Cellulose for Improvement of Wet Strength in Papers. Basparesh, 2014; 3(4): 49-57. doi: 10.22063/basparesh.2014.1030
)