Investigation of Different Emulsion Polymerization Methods for Preparing High Solid Content Latexes

Document Type : compile

Author

polymerization processing engineering department,, polymer processing faculty, ,IPPI

Abstract

One of the challenges in emulsion polymerization over the past two decades has been how to increase the solid content of polymer latex. Compared to conventional latex, high solid content latex (HSC) has a large volume fraction of the monomer dispersed phase, even more than 70% by weight. Increasing the concentration of polymer in latex, has important advantages such as increasing the space-time efficiency of the reactor, reducing the film formation and drying time, as well as reducing its storage and transportation costs. Conventional emulsion polymerization, mini-emulsion polymerization, self-emulsification polymerization, and concentrated emulsion polymerization have all been used to prepare HSC latexes, and good results have been reported in recent years. Production of HSC latexes in a reproducible manner requires precise control of the particle size distribution. To obtain a solid content above 60% or 70% by weight, the particle size distribution must be quite broad or multimodal. In addition, viscosity of HSC latex is highly sensitive to particle size distribution. In this study, the advances of the last few years, which are mainly in the preparation processes of such latexes and their applications are briefly reviewed.

Keywords

Main Subjects


1.  Javadi A., Cobaj A., and Soucek M.D., Commercial Waterborne Coatings, in:  Handbook of Waterborne Coatings, Elsevier, USA, 303-344, 2020.
2.  De J.C., Leiza J.R., Asua J.M., Butt A., Storti G., and Morbidelli M., Emulsion Polymerization, in:  Handbook of 
Polymer Reaction Engineering, Meyer T.H. and Keurentjes J. (Eds.), Wiley-VCH, Germany, 249-322, 2005.
3.  Chern C.S., Emulsion Polymerization Mechanisms and Kinetics, Prog. Polym. Sci., 31, 443-486, 2006.
4.  Limousin E.A.,  Efect of Particle Morphology on Film Morphology and Properties, PhD Thesis, University of the 
Basque Country, March 2019.
5.  Liang R., Zhang P., Wei C., Li H., Wang Z., Huang X., Yin W., and Chen X., Spontaneous Formation of Bimodal Particle Size Disributions: A Novel One-Step Strategy for Obtaining High Solid Content, Low Viscosity Poly(vinyl acetate-co-ethylene) Latexes, Prog. Org. Coat., 110, 86-96, 2017.
6.  Liang R., Zhang P., Wei C., Li H., Wang Z., and Chen X., A Novel Polymerization Method Based on Pressure Drop for 
Monomodal High Solid Content Low Viscosity Latexes of Poly(ethylene-co-vinyl acetate), RSC. Adv., 45, 38861-38868, 2016.
7.  Boutti S., Graillat C., and McKenna T.F., High Solids Content Emulsion Polymerisation without Intermediate Seeds. Part I. Concentrated Monomodal Latices, Polymer,  46, 1189-1210, 2005.
8.  Boutti S., Graillat C., and McKenna T.F., New Routes to High Solid Content Latexes: A Process for In Situ Particle 
Nucleation and Growth,  Macromol. Symp.,  206, 383-398, 2004.
9.  Guyot A., Chu F., Schneider M., Graillat C., and McKenna T.F., High Solid Content Latexes, Prog. Polym. Sci., 27, 1573-
1615, 2002.
10. Ai Z., Deng R., Zhou Q., Liao S., and Zhang H., High Solid Content Latex: Preparation Methods and Application,  Adv. 
Colloid. Interface Sci.,  159, 45-59, 2010.
11. Moraes R.P.,  Pushing The Boundaries of Concentrated Dispertions High Solids Content Bimodal Latex for Paper 
Coating Applications, PhD Thesis, Queen‘s University Kingson, Canada, May 2011.
12. Schneider M., Graillat C., Guyot A., and McKenna T.F., HighSolids Content Emulsions. II. Preparation of Seed Latices, J.
Appl. Polym. Sci., 84, 1897-1915, 2002.
13. Schneider M., Claverie J., Graillat C., and McKenna T.F.,High Solids Content Emulsions. I. A Study of the Infuence of
the Particle Size Disribution and Polymer Concentration onViscosity,  J. Appl. Polym. Sci., 84, 1878-1896, 2002.
14. Lovell P.A. and Schork F.J., Fundamentals of EmulsionPolymerization, Biomacromolecules,  21, 4396-4441, 2020.
15. Chu F., Guillot J., and Guyot A., Study of Poly(St/BA/MAA)Copolymer Latexes with Bimodal Particle Size Disribution,
Polym. Adv. Technol., 9, 851-857, 1998.
16. Tang C. and Chu F., Semicontinuous Emulsion Polymerizationof Styrene-Butyl Acrylate-Methacrylic Acid with High SolidContent, J. Appl. Polym. Sci., 82, 2352-2356, 2000.
17. Marinangelo G., Hirota W.H., and Giudici R., Semi-BatchEmulsion Copolymerization of Styrene and Butyl Acrylate for
Production of High Solids Content Latexes: Experiments andMathematical Model, Chem. Eng. Sci., 66, 5875-5890, 2011.
18. Moayed S.H., Fatemi S., and Pourmahdian S., Synthesis ofa Latex with Bimodal Particle Size Disribution for Coating
Applications Using Acrylic Monomers, Prog. Org. Coat., 60,312-319, 2007.
19. Agirre A., Calvo I., Weitzel H.P., Hergeth W.D., and AsuaJ.M., Semicontinuous Emulsion Co-polymerization of Vinyl
Acetate and VeoVa10, Ind. Eng. Chem. Res., 53, 9282-9295,2014.
20. Guyot A., Chu F., Schneider M., Graillat C., and McKennaT.F., High Solid Content Latexes, Prog. Polym. Sci., 27, 1573-
1615, 2002.
21. Unzueta E. and Forcada J., Semicontinuous EmulsionCopolymerization of Methyl Methacrylate and N-Butyl
Acrylate: 1. Efect of Mixed Emulsifers in SeededPolymerization,  Polymer,  36, 1045-1052, 1995.
22. Unzueta E. and Forcada J., Semicontinuous EmulsionCopolymerization of Methyl Methacrylate and N-butyl Acrylate:
2. Efect of Mixed Emulsifers in Unseeded Polymerization,Polymer,  36, 4301-4308, 1995.
23. Sajjadi S. and Brooks B.W., Semibatch Emulsion Polymerization of Butyl Acrylate. I. Efect of Monomer Disribution, J. Appl. Polym. Sci., 74, 3094-3110, 1999.
24. Sajjadi S. and Brooks B.W., Unseeded Semibatch Emulsion Polymerization of Butyl Acrylate: Bimodal Particle Size 
Disribution, J. Polym. Sci. Polym. Chem., 38, 528-545, 2000.
25. Chern C.S., Chen T.J., Wu S.Y., Chu H.B., and Huang C.F., Semibatch Seeded Emulsion Polymerization of Acrylic 
Monomers: Bimodal Particle Size Disribution, J. Macromol. Sci. Part A: Pure Appl. Chem.,  34, 1221-1236, 1997.
26. Ivan L.A., High Solids Content, Low-Viscosity Emulsion Polymers,  US Pat. 6,706,356, 2004.
27. Weitzel H.P., Process for Preparing Polymer Dispersions with a High Solids Content, US Pat. 6,632,869, 2003.
28. Vasile C., Polymeric Nanocomposites and Nanocoatings for Food Packaging: A Review, Materials,  11, 1834, 2018.
29. Montoro M.A. and Francisca F.M., Efect of Ion Type and Concentration on Rheological Properties of Natural Sodium 
Bentonite Dispersions at Low Shear Rates,  J. Appl. Polym. Sci.,  178, 105-132, 2019.
30. Yılmaz O., Cheaburu C.N., Gülümser G., and Vasile C., Rheological Behaviour of Acrylate/Montmorillonite 
Nanocomposite Latexes and their Application in Leather Finishing as Binders, Prog. Org. Coat.,  70, 52-58, 2011.
31. Diaconu G., Paulis M., and Leiza J.R., Towards the Synthesis of High Solids Content Waterborne Poly(methyl methacrylate-co-butyl acrylate)/Montmorillonite Nanocomposites, Polymer, 49, 2444-2454, 2008.
32. Bourgeat L.E., Guimarães T.R., Pereira A.M.C., Alves G.M., Moreira J.C., Putaux J.L., and Dos Santos A.M., High Solids 
Content, Soap-Free, Film-Forming Latexes Stabilized by Laponite Clay Platelets,  Macromol. Rapid Commun.,  31, 
1874-1880, 2010.
33. Asua J.M., Oswald Ripening of Reactive Cosabilizers in Miniemulsion Polymerization, Eur. Polym. J., 106, 30-41, 2018.
34. Asua J.M., Miniemulsion Polymerization, Prog. Polym. Sci., 27, 1283-1346, 2002.
35. Masa J.A., Arbina L.L., and Asua J.M., A Comparison Between Miniemulsion and Conventional Emulsion Terpolymerization of Styrene, 2-Ethylhexyl Acrylate and Methacrylic Acid,  J. Appl. Polym. Sci., 48, 205-213, 1993.
36. Unzué M.J. and Asua J.M., Semicontinuous Miniemulsion Terpolymerization: Efect of the Operation Conditions, J. Appl. Polym. Sci., 49, 81-90, 1993.
37. Akula S., Gurram A.K., and Devireddy S.R., Self-Microemulsifying Drug Delivery Sysems: An Attractive Strategy for Enhanced Therapeutic Profle,  Int. Sch. Res. Notices.,  14, 1-11, 2014.
38. Huang H., Zhang D., Fang S., Zhu J., and Peng X., Tuning the Optical Properties of High Solid Waterborne olyurethane 
from Matt to Anti-Glare, Prog. Org. Coat., 126, 44-52, 2019.
39. Wei X. and Zhang F., Preparation of an Ionic/nonionic Polyurethane-Silicone Dispersion (PUSD) with a High Solid 
Content and Low Viscosity Using Complex Soft Segments, J. Coat. Technol. Res.,  15, 1229-1237, 2018.
40. Ruckensein E., Concentrated Emulsion Polymerization, Springer, Berlin, 1-58, 2007.
41. Ruckensein E. and Sun F., A New Concentrated Emulsion Polymerization Pathway, J. Appl. Polym. Sci., 46, 1271-1277, 
1992.