1.Wang D., Xia H., Yang S., and Wang G., The Influence ofViscoelasticity on Micro Forces and Displacement Efficiency in Pores, Cores and in The Field, SPE EOR Conference At Oil and Gas West Asia, Muscat, 1-18,11-13 April, 2010.
2.Detling K.D., Process of Recovering Oil From Oil Sands, US. Pat. 2,341, 500, 1944.
3.Sandiford B.B., Laboratory and Field Studies of Water Floods Using Polymer Solutions to Increase Oil Recoveries, J. Pet. Technol., 16, 917-922, 1964.
4.Maurya N.K. and Mandal A., Studies on Behavior of Suspensionof Silica Nanoparticle in Aqueous Polyacrylamide Solution
for Application in Enhanced Oil Recovery, Pet. Sci. Technol.,34, 429-436, 2016.
5.Pu W.F., Liu R., Peng Q., Du D.J., and Zhao Q.N., AmphiphilicallyModified Chitosan Copolymer for Enhanced Oil Recovery
in Harsh Reservoir Condition, J. Ind. Eng. Chem., 37, 216-223, 2016.
6.Levitt D. and Pope G.A., Selection and Screening of Polymers for Enhanced-Oil Recovery, SPE Symp. Improv. Oil Recovery, Tulsa, 1-18, 20-23 April, 2008.
7.Modern Chemical Enhanced Oil Recovery: Theory and Practice,Sheng J. (Ed.), Elsevier, USA, 102-105, 2010.
8.Wever D.A.Z., Picchioni F., and Broekhuis A.A., Polymers for Enhanced Oil Recovery: A Paradigm for Structure–Property
Relationship in Aqueous Solution, Prog. Polym. Sci., 36, 1558-1628, 2011.
9.Sabhapondit A., Borthakur A., and Haque I., Characterization of Acrylamide Polymers for Enhanced Oil Recovery, J. Appl. Polym. Sci., 87, 1869-1878, 2003.
10.Sabhapondit A., Borthakur A., and Haque I., Water Soluble Acrylamidomethyl Propane Sulfonate (AMPS) Copolymer as an Enhanced Oil Recovery Chemical, Energy Fuels, 17, 683–688, 2003.
11.Song H., Zhang S.F., Ma X.C., Wang D.Z., and Yang J.Z., Synthesis and Application of Starch-g-Poly(AM-co-AMPS) by Using a Complex Initiation System of CS-APS, Carbohydr. Polym., 69, 189–195, 2007.
12.Vega I., Sánchez L., and D’Accorso N., Synthesis and Characterizationof Copolymers with 1, 3-Oxazolic Pendant Groups, React. Funct. Polym., 68, 233–241, 2008.
13.Jung J.C., Zhang K., Chon B.H., and Choi H.J., Rheology and Polymer Flooding Characteristics of Partially Hydrolyzed Polyacrylamide for Enhanced Heavy Oil Recovery, J. Appl. Polym. Sci., 127, 4833-4839, 2013.
14.Moradi-Araghi A., Bjornson G., and Doe P.H., Thermally StableGels for Near-wellbore Permeability Contrast Corrections, SPE Adv. Technol. Ser., 1, 140-145, 1993.
15.Moradi-Araghi A., Beardmore D.H., and Stahl G.A., The Applicationof Gels in Enhanced Oil Recovery: Theory, Polymers and Crosslinker Systems, Water-Soluble Polymers for PetroleumRecovery, Stahl G.A. and Schulz D.N. (Eds.), Springer, 299–312, 1988.
16.Lewandowska K., Comparative Studies of Rheological Propertiesof Polyacrylamide and Partially Hydrolyzed PolyacrylamideSolutions, J. Appl. Polym. Sci., 103, 2235-2241, 2007.
17.Løbø Viken A., Skauge T., and Spildo K., Rheological Propertiesof a hydrophobically Modified Anionic Polymer: Effect of Varying Salinity and Amount of Hydrophobic Moieties, J. Appl. Polym. Sci., 133, 43520- 43520, 2016.
18.Taylor K.C., Rheology of Hydrophobically Associating Polymersfor Oil Field Applications, Annu. Trans. Nordic Rheol. Soc., 11, 13-20, 2003.
19.Kobitskaya E., Synthesis of Hydrophobically Modified Polyacrylamidein Inverse Miniemulsion, Doctoral Dissertation, Germany, Ulm University, 2008.
20.Zhong C.R., Luo P.Y., Ye Z.B., and Chen H., Characterization and Solution Properties of a Novel Water-Soluble Terpolymer for Enhanced Oil Recovery, Polym. Bull., 62, 79–89, 2009.
21.Chagas B.S., Machado D.L.P. (Jr.), Haag R.B., De Souza C.R., and Lucas E.F., Evaluation of HydrophobicallyAssociated
Polyacrylamide-Containing Aqueous Fluids and Their Potential Use in Petroleum Recovery, J. Appl. Polym. Sci., 91, 3686–3692, 2004.
22.Ma Z., Lundberg D.J., Roberts S., and Glass E.J., Phase Behaviorsand Film Properties of Dispersions and Coatings ContainingAssociative and Conventional Thickeners, J. Appl. Polym. Sci., 49, 1509– 1527, 1993.
23.Pamies R., Cifre J.G.H., and De La Torre J.G., Brownian DynamicsSimulation of Polyelectrolyte Dilute Solutions Under Shear Flow, J. Polym. Sci., Part B: Polym. Phys., 45, 1–9,2007.
24.Shashkina Y.A., Zaroslov Y.D., Smirnov V.A., Philippova O.E., Khokhlov A.R., Pryakhina T.A., and Churochkina N.A, Hydrophobic Aggregation in Aqueous Solutions of HydrophobicallyModified Polyacrylamide in The Vicinity of Overlap Concentration, Polymer, 44, 2289-2293, 2003.
25.Lee K.E., Poh B.T., Morad N., and Teng T.T., Synthesis and Characterization of Hydrophobically Modified Cationic PolyacrylamideWith Low Concentration of Cationic Monomer, J. Macromol. Sci., Part A: Pure Appl. Chem., 46, 240-249, 2009.
26.Yang Q., Song C., Chen Q., Zhang P., and Wang P., Synthesis and Aqueous Solution Properties of Hydrophobically ModifiedAnionic Acrylamide Copolymers, J. Polym. Sci., Part B: Polym. Phys., 46, 2465-2474, 2008.
27.Lu H., Feng Y., and Huang Z., Association and Effective HydrodynamicThickness of Hydrophobically Associating PolyacrylamideThrough Porous Media, J. Appl. Polym. Sci., 110, 1837-1843, 2008.
28.Gouveia L.M., Paillet S., Khoukh A., Grassl B., and Müller A.J., The Effect of The Ionic Strength on the Rheological Behaviorof Hydrophobically Modified Polyacrylamide Aqueous Solutions Mixed with Sodium Dodecyl Sulfate (SDS) or CetyltrimethylammoniumP-toluenesulfonate (CTAT), Colloids. Surf. A., 322, 211-218, 2008.
29.Lee K.E., Poh B.T., Morad N., and Teng T.T., Synthesis and Characterization of Hydrophobically Modified Cationic Acrylamide Copolymer, Int. J. Polym. Anal. Charact., 13, 95–107, 2008.
30.Gao B., Guo H., Wang J., and Zhang Y., Preparation of HydrophobicAssociation Polyacrylamide in a New Micellar CopolymerizationSystem and its Hydrophobically Associative Property, Macromolecules, 41, 2890-2897, 2008.
31.Castelletto V., Hamley I.W., Xue W., Sommer C., Pedersen J.S., and Olmsted P.D., Rheological and Structural Characterizationof Hydrophobically Modified Polyacrylamide Solutionsin the Semidilute Regime, Macromolecules, 37, 1492-1501, 2004.
32.Xue W., Hamley I.W., Castelletto V., and Olmsted P.D., Synthesisand Characterization of Hydrophobically Modified Polyacrylamides and Some Observations on Rheological Properties, Eur. Polym. J., 40, 47-56, 2004.
33.Ren H., Chen W., Zheng Y., and Luan Z., Effect of HydrophobicGroup on Flocculation Properties and Dewatering Efficiencyof Cationic Acrylamide Copolymers, React. Funct. Polym., 67, 601-608, 2007.
34.Maia A.M., Borsali R., and Balaban R.C., Comparison Betweena Polyacrylamide and a Hydrophobically Modified Polyacrylamide Flood in a Sandstone Core, Mater. Sci. Eng., C, 29, 505-509, 2009.
35.Lai N., Dong W., Ye Z., Dong J., Qin X., Chen W., and Chen K., A Water-Soluble Acrylamide Hydrophobically Associating Polymer: Synthesis, Characterization, and Properties as EOR Chemical, J. Appl. Polym. Sci., 129, 1888-1896, 2013.
36.Gong L.X. and Zhang X.F., A New Approach to the Synthesis of Hydrophobically Associating Polyacrylamide via the InverseMiniemulsion Polymerization in the Presence of Template,eXPRESS Polym. Lett., 12, 778–787, 2009.
37.Garcıa-Ochoa F., Santos V.E., Casas J.A., and Gomez E., XanthanGum: Production, Recovery, and Properties, Biotechnol. Adv., 18, 549–579, 2000.
38.He H., Hong Y., Gu Z., Liu G., Cheng L., and Li Z., Improved Stability and Controlled Release of CLA with Spray-Dried Microcapsules of OSA-Modified Starch and Xanthan Gum, Carbohydr. Polym., 147, 243–250, 2016.
39.Cadmus M.C., Jackson L.K., Burton K.A., Plattner R.D., and Slodki M.E., Biodegradation of Xanthan Gum by Bacillus Sp, Appl. Environ. Microbiol., 44, 5–11, 1982.
40.Bragg J.R., Maruca S.D., Gale W.W., Gall L.S., Wernau W.C., and Beck D., Control of Xanthan-Degrading Organisms in the Loudon Pilot: Approach, Methodology, and Results, SPE Annu. Tech. Conf. Exhib., California, 5-8 October, 1983.
41.Jang H.Y., Zhang K., Chon B.H., and Choi H.J., Enhanced Oil Recovery Performance and Viscosity Characteristics of Polysaccharide Xanthan Gum Solution, J. Ind. Eng. Chem., 21, 741-745, 2015.
42.Wang X., Wang J., Zhang J., Zhao B., Yao J., and Wang Y., Structure–Antioxidant Relationships of Sulfated GalactomannanFrom Guar Gum, Int. J. Biol. Macromol., 46, 59–66, 2010.
43.Xue D. and Sethi R., Viscoelastic Gels of Guar and Xanthan Gum Mixtures Provide Long-term Stabilization of Iron Micro-and Nanoparticles, J. Nanopart. Res., 14, 1–14, 2012.
)