The effects of processing conditions were studied for ternary polymer blends based on polyamide 6 (PA6), polycarbonate (PC) and Acrylonitrile-butadiene rubber (NBR). The ternary blends were accumulated at fixed compositions (PA6/ PC/NBR: 80/10 /10 wt%) using counter-rotating twin-screw extruder under three levels of blending sequence, die temperature, and screw speed. The experimental design was fulfilled by using Taguchi experimental analysis and the field emission scanning electron microscopy (FESEM) micrographs were used to investigate the microstructure. The mechanical properties such as tensile properties (Young's modulus and yield stress) and impact strength were highly influenced by processing conditions and the mean effects of each factor were calculated to investigate their role on mechanical properties of the blends.
Abdoltajedini, P., Arefazar, A., Bakhshandeh, G. R., & Delkash, M. (2014). Optimization of Processing Conditions and Their Effects on PA6/PC/NBR
Ternary Blends. Basparesh, 3(4), 4-12. doi: 10.22063/basparesh.2014.1026
MLA
Payam Abdoltajedini; Ahmad Arefazar; Gholam Reza Bakhshandeh; Masoumeh Delkash. "Optimization of Processing Conditions and Their Effects on PA6/PC/NBR
Ternary Blends". Basparesh, 3, 4, 2014, 4-12. doi: 10.22063/basparesh.2014.1026
HARVARD
Abdoltajedini, P., Arefazar, A., Bakhshandeh, G. R., Delkash, M. (2014). 'Optimization of Processing Conditions and Their Effects on PA6/PC/NBR
Ternary Blends', Basparesh, 3(4), pp. 4-12. doi: 10.22063/basparesh.2014.1026
VANCOUVER
Abdoltajedini, P., Arefazar, A., Bakhshandeh, G. R., Delkash, M. Optimization of Processing Conditions and Their Effects on PA6/PC/NBR
Ternary Blends. Basparesh, 2014; 3(4): 4-12. doi: 10.22063/basparesh.2014.1026
)