@article { author = {Sheikhi, Mehdi and vakili, shaghayegh}, title = {Photocrosslinkable Resins for 3D Printing Applications}, journal = {Basparesh}, volume = {13}, number = {3}, pages = {3-13}, year = {2023}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2022.3148.1620}, abstract = {Three dimensional printing (3D) is a process of fabricating 3D objects through depositing layers of materials (such as polymers) on previous layers. Currently is considered one of the most important research fields in academic and industrial research centers. Among the various approaches to 3D printing, photopolymerization is of great interest due to the wide range of monomers/oligomers prone to photopolymerization reactions (photopolymers). Photoinitiators and monomers/oligomers are two important components of resins applied for 3D process, which affect not only the possibility of resin printing, but also the functional properties of the part such as mechanical strength, dimensional accuracy, transparency, modulus and others. In this article, the most important group of photopolymers used in the 3D printing process is reviewed from the point of view of reaction chemistry and their advantages and disadvantages. It is obvious that the design and manufacture of photocurable resins requires knowledge about the types of resins available and the challenges associated with them. Therefore, this article can be a good source for active researchers in this field.}, keywords = {3D printing,resin,photopolymer,acrylate,epoxy}, title_fa = {رزین‌های قابل شبکه‌ای‌شدن نوری برای کاربردهای چاپ سه‌بعدی}, abstract_fa = {چاپ سه ­بعدی فرایندی است که طی آن اجسام سه­ بعدی با افزودن لایه­ های متوالی مواد (مانند پلیمرها) روی هم ساخته می­ شوند. در حال حاضر، این فرایند از مهم­ترین زمینه­ های پژوهشی در مراکز  پژوهشی دانشگاهی و صنعتی به ­شمار می­رود. در میان رویکردهای مختلف برای چاپ سه ­بعدی، پلیمرشدن نوری به ­دلیل گستره­ وسیع مونومرها-اولیگومرهای قابل پلیمرشدن نوری (نورپلیمرها) بسیار مورد توجه قرار گرفته است. در این روش، دو جزء آغازگرهای نوری و مونومرها-اولیگومرها مهم­ترین اجزا برای چاپ سه ­بعدی هستند که نه تنها امکان چاپ رزین، بلکه بر خواص کاربردی قطعه مانند استحکام مکانیکی، دقت ابعادی، شفافیت، مدول و سایر موارد اثرگذارند. در این مقاله­، مهم­ترین دسته از نورپلیمرهای استفاده ­شده در فرایند چاپ سه­ بعدی از نقطه ­نظر شیمی واکنش و مزایا و معایب آن­ها مرور می­ شود. بدیهی است طراحی و ساخت رزین­ های ­پخت­ پذیر نوری نیازمند داشتن دانش درباره انواع رزین ­های موجود و چالش­ های مرتبط به آن است. از این رو، این مقاله می­ تواند منبع مناسبی برای پژوهشگران فعال در این زمینه باشد.}, keywords_fa = {چاپ سه‌بعدی,رزین,نورپلیمر,آکریلات,اپوکسی}, url = {http://basparesh.ippi.ac.ir/article_1897.html}, eprint = {http://basparesh.ippi.ac.ir/article_1897_b8aad827257cb5a4946606b9fbc3f733.pdf} }