@article { author = {Esfandiari, Nadia and Zareinezhad, Reza}, title = {A Review of the Application of Polymers to Drag Reduction in Horizontal Pipelines}, journal = {Basparesh}, volume = {10}, number = {2}, pages = {3-12}, year = {2020}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2019.2559.1492}, abstract = {In recent years, due to the importance of fluid transfer, much attention has been paid to the amount of energy consumption in this field. Much research has been done over the years on controlling energy consumption and optimizing transmission pipelines. By controlling the pressure drop, which is mainly due to increase friction and drag coefficient, the energy consumption of the fluid transfer pumps can be reduced and the capacity of the transmission pipelines can be increased. Using drag-reduction agents is one of the most important and simplest ways to overcome some of the energy losses during fluid transfer. Drag-reducing agents include surfactants, polymers, microbubbles, and so on. Polymers are widely used as drag-reducing material, and their usage is a fast and cost-effective solution for making changes in transmission pipelines. At very low concentrations, these materials can significantly reduce the frictional forces in pipelines. The use of drag-reducing polymers is a good alternative to increase the capacity of pipelines. Injection of drag-reducing polymers into the lines, in addition to reduce frictional pressure, increases the operational safety of pipelines, especially in worn-out pipes, and reduces energy consumption in pumps. Due to the remarkable properties of drag-reducing polymers in horizontal pipelines, their application in pipelines has been investigated in this study. Also, the parameters affecting the reduction of friction forces using drag-reducing polymers have been reviewed.}, keywords = {Polymer,Drag reduction,pipelines,Turbulent Flow,polymer concentration}, title_fa = {مروری بر کاربرد پلیمرها به منظور کاهش پسار در خطوط لوله افقی}, abstract_fa = {در سال‌های اخیر، با توجه به اهمیت انتقال سیالات توجه زیادی به مقدار مصرف انرژی در این زمینه شده است. بخش عمده‌ای از پژوهش­ها در این سال‌ها درباره کنترل مصرف انرژی و نیز بهینه‌سازی خطوط لوله انتقال انجام گرفته است. با کنترل کاهش‌ فشار که عمدتاً ناشی از افزایش اصطکاک و ضریب پسار است، می‌توان مصرف انرژی پمپ‌های انتقال‌دهنده سیالات را کاهش داده و ظرفیت خطوط لوله انتقال را افزایش داد. استفاده از مواد کاهنده‌ پسار از جمله مهم‌ترین و ساده‌ترین روش‌ها برای غلبه بر بخشی از تلفات انرژی به هنگام انتقال سیالات است. مواد کاهنده پسار شامل سطح­فعال­ها، پلیمرها، میکروحباب‌ها و غیره هستند. پلیمرها به عنوان مواد کاهنده‌ پسار کاربرد فراوانی دارند و استفاده از آن­ها راه‌حل سریع و مقرون به صرفه­ای برای ایجاد تغییرات در خطوط لوله انتقال است. این مواد با غلظت‌های بسیار کم می‌توانند نیروهای اصطکاک را به مقدار درخور توجهی در خطوط لوله کاهش دهند. استفاده از پلیمرهای کاهنده پسار جایگزین مناسبی برای افزایش ظرفیت خطوط لوله است. تزریق پلیمرهای کاهنده پسار در خطوط، افزون بر کاهش ‌فشار اصطکاکی سبب افزایش امنیت عملیاتی خطوط لوله، به­ویژه در لوله‌های فرسوده شده و به کاهش مصرف انرژی در پمپ‌ها منجر می‌شود. با توجه به ویژگی‌های قابل توجه پلیمرهای کاهنده‌ پسار در خطوط لوله‌ افقی، در این مطالعه کاربرد آن­ها در خطوط لوله بررسی شده است. همچنین، پارامترهای موثر بر کاهش نیروهای اصطکاک با استفاده از پلیمرهای کاهنده پسار مرور شده است.}, keywords_fa = {پلیمر,کاهش پسار,خطوط لوله,جریان متلاطم,غلظت پلیمر}, url = {http://basparesh.ippi.ac.ir/article_1683.html}, eprint = {http://basparesh.ippi.ac.ir/article_1683_91537b9c5a550b4e7d7efcc93956565f.pdf} }