@article { author = {}, title = {index}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {1-1}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {فهرست}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1320.html}, eprint = {http://basparesh.ippi.ac.ir/article_1320_bd67ed4b95f113db822d9e0ae32c9652.pdf} } @article { author = {}, title = {leading article}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {3-3}, year = {1970}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {سرمقاله}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1321.html}, eprint = {http://basparesh.ippi.ac.ir/article_1321_ca510d66d7b5490ebfc74bb0861015ae.pdf} } @article { author = {Zandi, Mojgan and خزلی, سکینه and Zandi, Mojgan}, title = {Review of the Nanofibrous Electrospun Substrate for Membrane Application}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {4-15}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1227}, abstract = {Polymeric membranes are important separation techniques, these membranes are porous or dense and are categorized as symmetric or asymmetric membranes. These devices do separation base on size or structure of the substrates. Nowadayd, different methods are used to fabricate of nanofibrous membranes which attract the researchers’ attention. Nanofibers are prepared via various methods, such that electrospinnig is one of the appropriate, easy and economical methods to fabricate the nanofibers which have found many applications in different scientific fields, including fabrication of nanofibrous membrane for using in filtration process. The characteristics of these membranes are high porosity; of about 80%, highly interconnected pores and large ratio of surface area to volume. On the other hand, polyethersulfone is a polymer with special properties such as heat and chemical resistance as well as biocompatibility. In these membranes select of solvent, process and environmental conditions are many important that affected on nanifibrous substrate properties. Nanofibrous membranes could be improved whit the chemical and physical modification. In this paper, an overview of the process for electrospinning of polyethersulfone membrane has been investigated.}, keywords = {nanofiber membrane؛ Electrospinning؛ polyethersulfone,mat,application}, title_fa = {مروری بر بستر های نانو لیفی الکتروریسی شده بر پایه پلی اتر سولفون با کاربرد غشایی}, abstract_fa = {چکیدهغشاهای پلیمری یکی از مهمترین ابزار جداسازی در صنایع مختلف هستند، این غشاها متخلخل یا متراکم بوده و به انواع متقارن و نا متقارن تقسیم بندی می شوند. غشا بر اساس اندازه ذرات یا ماهیت ، جداسازی می کنند. روش های متفاوتی برای تهیه غشاها استفاده می شود کهنانو الیاف یکی از انواع آن هاست. نانو الیاف پلیمری نیز با روش های مختلفی ساخته می شوند که الکتروریسی یکی از روش های مناسب، آسان و مقرون به صرفه برای تهیه نانو الیاف است که کاربرد های بسیاری در زمینه های متنوع دارد. از جمله کاربرد های آن تهیه بستر های نانو لیفی برای مصارف غشایی است.از ویژگی های این غشاها میتوان به تخلخل بالا، متصل بودن حفرات به یکدیگر و نسبت بالای مساحت سطح به حجم اشاره کرد. از طرفی خواص ویژه پلیمر پلی اتر سولفون مانند مقاومت حرارتی ، شیمیایی و زیست سازگار بودن با در نظر گرفتن مزایای روش الکتروریسی توجه بسیاری از محققین به غشاهای پلی اترسولفونی تهیه شده به روش الکتروریسی جلب شد. در این مقاله به اصول فرایند الکتروریسی برای تهیه غشاهای نانو لیفی و غشاهای نانو لیفی پلی اتر سولفونی و عوامل موثر بر آن مانند عوامل محلولی، دستگاهی و محیطی با کاربردغشایی پرداخته شده است. در تهیه این غشاها انتخاب حلال مناسب، شرایط فرایندی و محیطی بسیار حایز اهمیت بوده و خواص نانو الیاف را تحت تاثیر قرار می دهد غشاهای نانو لیفی این امکان را دارند که با اصلاحات فیزیکی و شیمیایی خواص آن ها را بهبود بخشید.}, keywords_fa = {غشای نانولیفی؛ الکتروریسی؛ پلی اترسولفون,بستر,کاربرد}, url = {http://basparesh.ippi.ac.ir/article_1227.html}, eprint = {http://basparesh.ippi.ac.ir/article_1227_84a8fef84004d4845ffe125197cbf57b.pdf} } @article { author = {Khani, Mojtaba and chegeni, asma and bahrami, ali}, title = {Effect of aeration intensity, agitation speed, temperature and pH parameters on production of a microbial polysaccharide}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {28-16}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1219}, abstract = {Biopolymers are biological macromolecules that large and small subunits that bind covalently to the same are connected by a long chain of cause and they are built. Because of the biopolymers are produced naturally of the living organisms such as plants, animals and microorganisms therefor are biodegradable, they are very good. Types of biopolymers, are including nucleic acids, proteins, polysaccharides, polyhydroxyalkanoate, polyphenols, and polysulfone. In order to use biopolymers in industry to commercialization the production process and optimize its production, According to studies on optimizing the production of biopolymers is specified In addition to the impact of important nutritional factors in the production process of biopolymers such as sources of carbon, nitrogen, phosphorus, sulfur and physical factors in the production process of biopolymers are highly effective. In this study, parameters such as intensity, aeration, agitation speed, temperature and pH for optimal production of biopolymers have been investigated. According to the results, most references are considered appropriate values for the aeration rate, agitation speed, temperature and pH, respectively 0.5-3 vvm, 200-800 rpm, 27-32°C, 8-5, ‌that under this condition will produce the polysaccharide.}, keywords = {microbial biopolymer,microbial polysaccharide,Aeration rate,Agitation speed,temperature}, title_fa = {اثرپارامترهای سرعت هوادهی، دما، سرعت همزن و pH بر تولید پلی ساکاریدهای میکروبی}, abstract_fa = {بیوپلیمر ازنظر بیوشیمی دان ها عبارت است از ماکرو مولکول‌های بیولوژی که از تعداد زیادی زیر واحد کوچک و شبیه به هم که بااتصال کووالانسی به هم متصل شده‌اند و یک زنجیره طولانی را ایجاد می‌کنند، ساخته‌شده‌اند. با توجه به این‌که بیوپلیمرها از موجودات زنده از قبیل گیاهان، جانداران و میکروارگانیسم‌ها به‌طور طبیعی تولید می‌شوند و ازلحاظ زیست‌محیطی نیز تجزیه‌پذیر هستند، بسیار مناسب می‌باشند. انواع بیوپلیمرها شامل اسیدهای نوکلوئیک، پروتئین‌ها ، پلی‌ساکاریدها، پلی‌هیدروکسی آلکانوات، پلی فنول، پلی فسفات و پلی سولفات‌ها هستند .به‌منظور استفاده از بیوپلیمرها در صنایع نیاز به تجاری کردن فرآیند تولید و همچنین بهینه کردن تولید آن‌ها است با توجه به مطالعات انجام‌شده در خصوص بهینه‌سازی شرایط تولید بیوپلیمر مشخص‌شده است علاوه بر تأثیر عوامل تغذیه‌ای مهم در فرآیند تولید بیوپلیمرها از قبیل منابع کربن، نیتروژن‌، فسفر، گوگرد و... عوامل فیزیکی و غیر تغذیه‌ای نیز در فرآیند تولید بیوپلیمرها بسیار مؤثر می‌باشند. در این مطالعه به بررسی پارامترهایی نظیر شدت هوادهی، دور همزدن، دما و pH در تولید بهینه پلی ساکارید های میکروبی که یکی از مهم‌ترین و پرکاربردترین بیوپلیمرها هستند، پرداخته‌شده است. با توجه به نتایج، در اکثر منابع بررسی‌شده مقادیر مناسب برای شدت هوادهی، دور همزدن، دما و pH به ترتیب vvm 3-0.5، rpm800-200 ، C‌°32-27 ، 8-5‌ در نظر گرفته‌شده ، که بهینه مقدار پلی ساکارید تولید خواهد شد.}, keywords_fa = {زیست پلیمر میکروبی,پلی ساکاریدهای میکروبی,سرعت هوادهی,سرعت همزدن,دما}, url = {http://basparesh.ippi.ac.ir/article_1219.html}, eprint = {http://basparesh.ippi.ac.ir/article_1219_568bb5988de5737515ec65d489d891f0.pdf} } @article { author = {Sheikholeslami, Zeinab Sadat and Mahdavian, Alireza}, title = {smart polymer 5- self healing ionomeric polymers}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {29-42}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1230}, abstract = {When the damage occurs in conventional materials, it requires to human intervention to identify, repair or replace parts of the system; while the automatic detection of damage and its improve is one of the unique properties of biological systems such as blood clots, heal a broken bone, and repair of a damaged tissue. In this regard and in imitation of the unique features of the nature and inspired by biological processes, researchers have attempted to develop self-healing smart materials. Smart materials are automatically able to diagnose and treat injury which has the potential to reduce costs in addition to reducing the amount of human interaction, damage minimizing and reducing the need for replacement of the parts in the system. Unlike the conventional self-healing materials that are contain microspheres or tubes containing a healing agent and heal the damage through the chemical means and would not be expected to heal following such a macroscopic and energetic damage event as ballistic puncture or fracture; self healing ionomers are able to heal the damage in a short period of time independently that cause minimum coast. In fact, the Ionomer self-healing ability is an inherent material response rather than by design, suggesting a very different healing mechanism. It occurs automatically and instantaneously without manual intervention—indeed it is an autonomic self-healing process. This paper provides a review of the work on self-healing ionomers, the mechanism behind this ability, and the methods used to uncover this unique response, including ballistic and other techniques.}, keywords = {Smart polymers؛ Ionomeric polymers؛ Self-healing؛ Balistic,Stimulus-response}, title_fa = {پلیمرهای هوشمند 5- پلیمرهای یونومری خود ترمیم شونده}, abstract_fa = {هنگامی‌که آسیب در موادِ معمول رخ می‌دهد نیاز به دخالت انسان برای شناسایی، تعمیر یا جایگزینی آن بخش از سیستم وجود دارد در حالیکه تشخیص خودکار آسیب و بهبود آن از خواص منحصر به فرد سیستم‌های بیولوژیکی است مانند لخته‌شدن خون، التیام یک استخوان شکسته، و تعمیر بافت آسیب دیده. در همین راستا و به تقلید از این ویژگی‌های منحصر به فرد در طبیعت و الهام از فرآیندهای بیولوژیکی، پژوهشگران اقدام به توسعه مواد هوشمند خود ترمیم‌شونده نموده‌اند. مواد هوشمند به صورت خودکار قادر به تشخیص و درمان آسیب هستند که دارای پتانسیل لازم برای کاهش هزینه‌ها در کنار کاهش میزان تعامل انسان، به حداقل رساندن خرابی و کاهش نیاز برای جایگزینی قطعه در سیستم می‌باشند. بر خلاف خودترمیم‌شونده‌های معمول که حاوی میکروکره‌ها یا لوله‌های حاوی یک عامل ترمیم‌کننده هستند و از طریق ابزارهای شیمیایی بهبود می‌یابند و انتظار نمی‌رود که بتوانند آسیب‌های ماکروسکوپی و تحت انرژی بالا مانند سوراخ شدن و یا شکستگی را ترمیم کنند آینومرهای خود ترمیم‌شونده این توانایی را دارند که در دوره زمانی کوتاهی تخریب حاصله را به صورتی مستقل برگردانند و به مراتب کمترین هزینه ساخت و تهیه را نیز دارند. در آینومرها توانایی خودترمیمی به طبیعت ماده که پاسخی ذاتی است برمی‌گردد و نه به طراحی سیستم. این امر به صورت خودکار و آنی، و بدون دخالت دست اتفاق می‌افتد. در این نوشتار، مروری بر کار خودترمیمی آینومرها، مکانیسم و روش‌های مورد استفاده برای بررسی این پاسخ منحصر به فرد به ویژه ضربه گلوله (بالستیک) ارائه شده است.}, keywords_fa = {پلیمرهای هوشمند,پلیمرهای یونومری,خودترمیمی,بالستیک,محرک-پاسخ}, url = {http://basparesh.ippi.ac.ir/article_1230.html}, eprint = {http://basparesh.ippi.ac.ir/article_1230_8bd8605ec2c2e7eb61c3f75e12be9839.pdf} } @article { author = {Moadeli, Mohamadreza and Sefidruh, Mostafa}, title = {Improving Adhesives Characteristics With Nano-Reinforcements: A review}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {43-53}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1221}, abstract = {Adhesives are one of materials which mankind have been used from many years ago. Adhesive used in many cases and different situations, one of these uses is joints. Joints play an important role in structural uses, so the adhesive which use in joints, must meet the requirement of a structural adhesive and can be use in different service conditions and environmental situation. These days with changes in industrial needs, appearing new technologies, increased commercial availability and reduce prices, reinforcement of adhesives with nano reinforcements widely researched and reported. Nanoreinforcements due to their high ratio aspect and specific area, can improve polymer properties when add to polymer matrix as a reinforcement. In this paper, adhesive and mechanisms of adhesion explained, nanoreinforcements as an appropriate alternative to other kind of fillers and reinforcements are introduced, also those kind of adhesive properties which addition of nanoreinforcements made changes on them are explained. Nano reinforcements in 3 categories (inorganic, Carbon Nanotube and carbon Nanofiber) are introduced and their effects on adhesive polymer are discussed.}, keywords = {Nanocamposites,Reinforced Adhesives,Nano-Reinfocements,Carbon Nanofiber,carbon nanotube}, title_fa = {مروری بر بهبود ویژگی های چسب‌ها با نانوتقویت‌کننده‌ها}, abstract_fa = {چسب‌ها از جمله مواد مهمی هستند که از سالیان دراز برای اتصال مواد از آن‌ها استفاده می‌شده است. امروزه با تغییر نیازهایی که در کاربرد چسب‌ها احساس می‌شود و همچنین پیشرفت تکنولوژی، تقویت چسب به وسیله نانوتقویت‌کننده‌ها از زمینه‌های مورد علاقه‌ی محققین می‌باشد. هدف از تقویت چسب، مهیا کردن آن جهت استفاده در شرایط سرویس و دمایی مختلف می‌باشد. نانوتقویت‌کننده‌ها به سبب خواص منحصر به فردی که دارند، قادر به بهبود خواص پلیمری که به آن افزوده می‌شود را دارا می‌باشد. از جمله خواص تقویت‌کننده‌های در مقیاس نانو، می‌توان به سطح ویژه و ضریب کشیدگی بالایشان اشاره کرد. در این مقاله ضمن معرفی چسب و تئوری‌های چسبندگی، نانوتقویت‌کننده‌ها به عنوان گزینه‌ی مناسبی برای بهبود خواص چسب معرفی خواهد شد، همچنین خواصی از چسب که پس از افزودن نانوتقویت‌کننده‌ها دچار تغییر می‌شود، مورد بررسی قرار می‌گیرد و در پایان به نانوتقویت‌کننده‌ها در 3 دسته‌ی معدنی، لوله‌های کربنی و الیاف کربنی، و اثرشان روی پلیمر چسب، پرداخته خواهد شد.}, keywords_fa = {نانوکامپوزیت,چسب‌های تقویت‌شده,نانوتقویت‌کننده‌,نانولوله‌های کربن,نانوالیاف کربن}, url = {http://basparesh.ippi.ac.ir/article_1221.html}, eprint = {http://basparesh.ippi.ac.ir/article_1221_fc669b35115c71f6a31faa1126f7b7b1.pdf} } @article { author = {foroutani, kamran and hosseini, seyyed mostafa and yousefi, ali akbar}, title = {A Review on Piezoelectricity, Polling and their Measuring Methods in Semi Crystalline Polymers}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {54-65}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1224}, abstract = {Piezoelectric materials have been used in manufacturing of piezoelectric sensors. Actually, sensors are the electromechanical converters which convert mechanical waves and forces into electrical signals and conversely. Piezoelectric property was firstly discovered in ceramics. However, because of the need to piezoelectric materials with large surfaces and high flexibility in many applications, and also because of the relatively low price and facile manufacturing technology of polymers in comparison with ceramics, polymers are the material of the choice that have been more studied. Piezoelectric polymeric sensors and actuators offer the advantage of processing flexibility because they are lightweight, tough, readily manufactured into large areas, and can be cut and formed into complex shapes. Accordingly, in this review article, at first piezoelectric property and characteristics requirements for piezoelectric polymers (the mechanism and key components required for developing piezoelectricity in semi crystalline polymers) are studied, and then various polling methods of piezoelectric polymers and different methods for measuring piezoelectric response are described.}, keywords = {Piezoelectric Property؛ Semi Crystalline Polymers؛ Polling؛ferroelectricity,sensor}, title_fa = {مروری بر پلیمرهای پیزوالکتریک، روش های قطب‌دهی و اندازه‌گیری خواص پیزوالکتریک در پلیمرهای نیمه‌بلوری}, abstract_fa = {از مواد پیزوالکتریک، در ساخت حسگرهای پیزوالکتریکی استفاده می‌شود. در واقع حسگر، مبدلی الکترومکانیکی است که امواج و نیروهای مکانیکی را به علامت‌های الکتریکی و برعکس تبدیل می‌کند. خاصیت پیزوالکتریک ابتدا در سرامیکها کشف شد. اما به دلیل نیاز به مواد پیزوالکتریک با سطح بزرگ و انعطاف‌پذیری زیاد در بسیاری از کاربردها و نیز به دلیل قیمت نسبتا ارزان و فناوری تولید ساده، پلیمرها مورد مطالعه قرار گرفتند. حسگرها و عملگرهای پیزوالکتریک پلیمری از فرایندپذیری مناسبی برخوردار می‌باشند. این فرایندپذیری مناسب به دلیل وزن اندک، چقرمگی، قابلیت تولید به صورت مساحت ‌های وسیع و نیز امکان برش و ایجاد اشکال پیچیده است. از این رو، در این مقاله در ابتدا به بررسی خاصیت پیزوالکتریک و ویژگی‌های مورد نیاز در پلیمرها برای ایجاد این خاصیت در آن‌ها (مکانیزم و مؤلفه‌های کلیدی مورد نیاز برای ایجاد پیزوالکتریسیته در پلیمرهای نیمه بلورین) پرداخته و در ادامه مفصلا به بررسی روش‌های مختلف قطب‌دار کردن پلیمرهای پیزوالکتریک و نیز انواع روش‌های اندازه‌گیری پاسخ پیزوالکتریک می‌پردازیم.}, keywords_fa = {خاصیت پیزوالکتریک؛ پلیمرهای نیمه بلوری؛ قطب‌دهی؛ فروالکتریسیته,حسگر}, url = {http://basparesh.ippi.ac.ir/article_1224.html}, eprint = {http://basparesh.ippi.ac.ir/article_1224_c64bc3731d341ab9fabf5169f3ca963d.pdf} } @article { author = {عاشوری بجستانی, علیرضا and مرتضایی, مهرزاد and khalafi, hamidreza}, title = {The Effect of Fiber Presence on the Curing Kinetics of Thermoset Resins}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {66-75}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1226}, abstract = {Thermoset resins are the most widely used resins in diverse industries including aerospace and automotive industries. To improve or add special properties such as mechanical properties, thermal or electrical, fiber thermoset resins are being used in the formulation. In this paper, we will discuss about investigating the effect of fiber on the curing kinetics of thermosetting resins with chemical and physical point of view. From the physical point, heat capacity and thermal conductivity of resin change by presence of fibers, and prevent the flow and dynamics of molecular functional groups by creating a physical barrier. And by investigating the effects of presence of fibers From the chemical point, we can see that the degree of starching fibers, use of the binding agent and also type and amount of binding agent changes in the kinetics of the curing of thermoset resins. The remarkable thing is that the presence of fluid coupling agents creates a bake velocity gradient from the surface of the fibers to the bulk resin. In conclusion we can say that in presence of fibers, the resin activation energy decreased, resin baking reaction in lower temperatures and times began and goes with the lower maximum speed.}, keywords = {composite,Thermoset Resins,fiber,Coupling Agent,Curing Kinetics}, title_fa = {اثر حضور الیاف بر سینتیک پخت رزین‌های گرماسخت}, abstract_fa = {رزین‌های گرماسخت از جمله پرکاربردترین رزین‌های مصرفی در صنایع مختلف از جمله صنایع هوافضا و خودرو می‌باشند. برای بهبود یا افزودن یک خاصیت ویژه مانند خواص مکانیکی، حرارتی یا الکتریکی، از الیاف در فرمولاسیون رزین‌های گرماسخت استفاده می‌شود. در این مقاله به بررسی اثر حضور الیاف بر سینتیک پخت رزین‌های گرماسخت‌ با دو دیدگاه فیزیکی و شیمیایی پرداخته می‌شود. از دیدگاه فیزیکی حضور الیاف باعث تغییر ظرفیت گرمایی و ضریب هدایت حرارتی رزین شده و با ایجاد ممانعت فیزیکی، از جریان یافتن و تحرک مولکولی گروه‌های عاملی جلوگیری می‌کند. با بررسی اثر حضور الیاف از دیدگاه شیمیایی مشاهده می‌شود که میزان آهار زنی الیاف، استفاده از عامل اتصال و همینطور نوع و میزان عامل اتصال تغییراتی در سینتیک پخت رزین‌های گرماسخت ایجاد می‌کند. نکته قابل توجه این است که وجود عوامل اتصال سیلانی باعث بوجود آمدن یک گرادیان سرعت پخت از سطح الیاف به سمت توده رزین می‌شود. در پایان با جمع بندی مطالعات انجام شده می‌توان گفت با حضور الیاف، انرژی فعالسازی رزین کاهش یافته، واکنش پخت رزین در دما یا زمان‌های کمتر آغاز شده و با بیشینه سرعت کمتری نیز پیش می‌رود.}, keywords_fa = {کامپوزیت,رزین‌های گرماسخت,الیاف,عامل اتصال,سینتیک پخت}, url = {http://basparesh.ippi.ac.ir/article_1226.html}, eprint = {http://basparesh.ippi.ac.ir/article_1226_9be98a5acc0a90039fbf9d4361046e5a.pdf} } @article { author = {vahidifar, ali and نوری خراسانی, سعید and خنکدار, حسین علی and اسمی زاده, الناز and اسمعیلی نیسیانی, رسول}, title = {morphology and property of closed cell rubber foams}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {76-83}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1223}, abstract = {In this study, parameters related to closed cell rubber foam prepared from solid rubber have been studied. It is revealed that two kind of parameters including a)processing parameters such as pre-cure temperature and time, foaming temperature, pressure and time, b) formulation parameters such as rubber, curing agent, fillers, foaming agent type and their content control the properties of foam effecting morphology and microstructure of it. The hardness and modulus of the foam inversely depends on the expansion of foam cells. In the other words, decrease in cell size leads to increase in modulus, hardness, foam density and cellular thickness. The increase in pre-curing temperature, pre-curing time, foaming pressure, the content of filler and curing agent increase the foam density while they illustrate the inverse effect on cellular size. In addition, increase of foaming agent content and foaming temperature decrease the density of foam while increase the cell size. It is observed that increasing the cure rate of rubber foams significantly increases the modulus of the foams which is the direct result of increased density and decreased cell size.}, keywords = {rubber؛ rubber foam؛ chemical blowing agent؛ closed cell foam,grade}, title_fa = {عوامل موثر بر شکل شناسی و خواص اسفنج های لاستیکی سلول بسته}, abstract_fa = {در این مقاله پارامترهای موثر در تولید اسفنج لاستیکی سلول بسته تولید شده از لاستیک جامد مورد بررسی قرار گرفته است. مطالعات نشان داد که پارامترهای فرایندی مانند دما و زمان پیش پخت، دما و زمان فوم شدن، فشار اسفنج شدن و پارامترهای طراحی فرمولاسیون مانند نوع لاستیک، نوع و درصد عامل پخت،  تقویت کننده و  پف دهنده روی ریزساختار و در نتیجه خواص اسفنج موثر هستند. در اسفنج ها، دو پدیده انبساط سلول های اسفنج در تقابل با مدول و سختی لاستیک است. در بین پارامترهای بالا، پارامترهایی مانند افزایش دمای پیش پخت، افزایش زمان پیش پخت، افزایش فشار اسفنج شدن، مقدار دوده، سیستم پخت با سرعت بالاتر که باعث افزایش مدول و سختی آمیزه می شوند اندازه سلول ها را کاهش، شخامت دیواره سلولی را افزایش و چگالی را بیشتر می کنند ودر نهایت خواص فیزیکی مکانیکی را بهبود می بخشند. از طرف دیگر، پارامترهایی مانند مقدار پف دهنده، کاهش فشار اسفنج شدن که به انبساط سلولی کمک می کنند باعث کاهش دانسیته و افزایش اندازه سلولی، کاهش ضخامت دیواره های سلولی و تضعیف خواص می شود.}, keywords_fa = {لاستیک؛ اسفنج لاستیکی؛ اسفنج سلول بسته؛ عامل پف زای شیمیایی,نوع}, url = {http://basparesh.ippi.ac.ir/article_1223.html}, eprint = {http://basparesh.ippi.ac.ir/article_1223_761b73029c2b8f32292ac3c7016085c1.pdf} } @article { author = {khaleghi moghadam, mahroo and Shabanian, Meisam}, title = {An overview on evolution of polyethylene pipes: production methods and standards}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {84-91}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1225}, abstract = {Abstract : polyolefins are The most important polymer in the production of pipe &fittings industry. Properties and specifications of plastics - particularly polyethylene - has increased trends of their usage in industry only in short time after their production. The use of polyethylene has been a growing in Piping systems for water supply, for drainage and … in recent years. Naturally, this growth will continue, if the new technologies in materials, processes, and methods are used in production and installation of this pipes and their fittings. Different grades of polyethylene materials are based on the type, Application Temperature and hydrostatic pressure tolerate comes from the changes in density of components blend or method of processecing for Resolving any problems of Previous types.In this paper, introduced the Process of evolution, characteristics of this modified type,their advantage, methods of production and evaluation of the product of this material is based on existing standards.}, keywords = {polyethylene pipe؛ bimodal distribution؛ Ziegler–Natta؛ standard,production}, title_fa = {مروری بر سیر تکاملی ساخت لوله های پلی اتیلن : روش های تولید و استانداردها}, abstract_fa = {روند رو برشد استفاده از مواد پلاستیکی و بطور خاص پلی اتیلن در صنعت نتیجه خواص و مشخصات این مواد و کاربردهای آن می باشد که باعث شده است در مدت زمان کوتاهی که از عمر آن می گذرد از پیشرفت چشمگیری در تولید و میزان کاریری برخوردار باشد؛ طبیعی است این رشد چشمگیر در صورتی تداوم خواهد یافت که در گذشت زمان شاهد استفاده از تکنولوژی‌های جدید در مواد اولیه، فرآیند ساخت و روش‌های اتصال و نصب این گونه از لوله ها در صنعت باشیم. گونه‌های متفاوتی از مواد اولیه پلی اتیلن براساس نوع و دمای کاربرد آن و درجه سختی و تحمل فشار مطرح گردیده است؛ که با تغییراتی در چگالی آمیزه یا فرایند تولید ودر راستای رفع مشکلات دسته قبلی و کمک به صنعت موجود پدید آمده‌اند. در این مقاله روند سیر تکاملی، مشخصات، روش‌های تولید گونه‌های بهبودیافته، مزایای هر گونه و ارزیابی محصولات حاصل از این مواد، با نگرشی بر استاندارد‌های موجود به تفضیل ارائه شده است.}, keywords_fa = {لوله پلی اتیلن,توزیع دو قله ای,زیگلر ناتا,استاندارد}, url = {http://basparesh.ippi.ac.ir/article_1225.html}, eprint = {http://basparesh.ippi.ac.ir/article_1225_8c846104eba6ad728ccd30375b394b1b.pdf} } @article { author = {خواجوند صالحی, زینب and افشین, زهره}, title = {Productivity Measurment and Ranking of Research Units Using Data Envelopment Analysis}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {92-99}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {10.22063/basparesh.2016.1228}, abstract = {Today it is necessary and important that productivity is increased and universities and research units have basically roll at development of countries productivity.TThe productivity measurement of research units, their performance analysis and comparison has an important rule in increasing efficiency level these units, as well as, it is a confidence for future programming of units. In this article, malmquist index, which is one of the productivity measurement index is introduced. At the rest, the procedure for determination of the index using DEA method is explained and finally with an experiment example, the malmquist productivity growth index is calculated for 14 research units of Iran polymer and petrochemical institute (IPPI) from 1389 to 1390. therefore costs and human resources as inputs and revenue and scientific achievements as outputs for research groups are compared.finally, the units are ranked with CCR results and AP model, and progress or regressive research units and faculties is determined.}, keywords = {productivity,data envelopment analysis,malmquist index}, title_fa = {اندازه گیری بهره وری و رتبه بندی واحدهای پژوهشی با استفاده از روش تحلیل پوششی داده ها}, abstract_fa = {در جهان امروز نیاز به بهره‌وری بیشتر، امری حیاتی و ضروری است و دانشگاه‌ها و مراکز پژوهشی نقش تعیین کننده‌ای در رشد و توسعه بهره‌وری کشورها خواهند داشت. در کشور ما نیز دانشگاه‌ها و مراکز پژوهشی در سازماندهی پژوهش نقش طراز اول را داشته و ارزیابی کارآیی سیستم تحقیقاتی و ارائه راه کار بهبود کارآیی آنها بسیار حیاتی می باشد. اندازه‌گیری بهره‌وری مراکز پژوهشی، تحلیل و مقایسه عملکرد آنها نقش مهمی در ارتقا سطح کارآیی آنها داشته و پشتوانه‌ای برای برنامه‌های آتی سازمان می‌باشد. در این مقاله، شاخص مالم‌کوئیست که یکی از شاخصهای اندازه‌گیری بهره‌وری است، معرفی می‌شود. در ادامه، تعیین این شاخص با استفاده از روش تحلیل پوششی داده‌ها (DEA ) تشریح و در نهایت با استفاده از یک مثال تجربی، شاخص رشد بهره‌وری مالم کوئیست برای چهارده گروه پژوهشی پژوهشگاه پلیمر و پتروشیمی ایران طی سالهای 1389 تا 1390 محاسبه می گردد. بدین منظور گروه‌های پژوهشی از نظر میزان هزینه و تعداد نیروی انسانی پژوهشی به عنوان ورودی‌ها و دستاوردهای علمی و میزان درآمد به عنوان خروجی ها مورد بررسی و مقایسه قرار خواهند گرفت. در پایان، رتبه بندی واحدها با استفاده از نتایج مدل CCR و مدل AP انجام و میزان پیشرفت یا پسرفت گروه‌های پژوهشی و پژوهشکده‌های پژوهشگاه پلیمر و پتروشیمی ایران مشخص می‌شود.}, keywords_fa = {بهره وری؛ تحلیل پوششی داده؛ شاخص مالم کوئیست,رتبه بندی,مرز کارایی}, url = {http://basparesh.ippi.ac.ir/article_1228.html}, eprint = {http://basparesh.ippi.ac.ir/article_1228_93b605f5aa0a1c20e2710d3455775968.pdf} } @article { author = {}, title = {scientific news}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {100-103}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {اخبار علمی}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1315.html}, eprint = {http://basparesh.ippi.ac.ir/article_1315_78c54c5b187b9535a3406b7d3e8a6cf9.pdf} } @article { author = {}, title = {thesis}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {104-105}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {معرفی پایان نامه}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1316.html}, eprint = {http://basparesh.ippi.ac.ir/article_1316_63d2920a55b9383876d57a3e673b3db8.pdf} } @article { author = {}, title = {books}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {106-107}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {معرفی کتاب}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1317.html}, eprint = {http://basparesh.ippi.ac.ir/article_1317_662c4b9b49fbac2083b5dcef6e711f54.pdf} } @article { author = {}, title = {seminar}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {108-108}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {همایش ها}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1318.html}, eprint = {http://basparesh.ippi.ac.ir/article_1318_e88465f57ec4034c27ff5157b72d1953.pdf} } @article { author = {}, title = {website}, journal = {Basparesh}, volume = {5}, number = {4}, pages = {109-109}, year = {2016}, publisher = {Iran Polymer and Petrochemical Institute}, issn = {2252-0449}, eissn = {2538-5445}, doi = {}, abstract = {}, keywords = {}, title_fa = {وبگاه}, abstract_fa = {}, keywords_fa = {}, url = {http://basparesh.ippi.ac.ir/article_1319.html}, eprint = {http://basparesh.ippi.ac.ir/article_1319_359438f1e055b159ac1276314c87ca74.pdf} }